Stogdengio lituoklis ( be žarnos)  su automatiniu piezo uždegimu ir dujų balionėliu ( 15% propileno + butano + propano).

Stogdengio lituoklis ( be žarnos)  su automatiniu piezo uždegimu ir dujų balionėliu ( 15% propileno + butano + propano) metalinėje dėžutėje.

15% propileno + butano + propano dujų balionėlis ( 60g). Skirtas naudojimui kartu su lituokliu ( kodu 364),  jo komplektu dėžutėje ( kodu 6364) ir taip pat dujiniu šildymo pistoletu ( kodu 4500).

Tinka naudojimui visais metų sezonais iki -2 °C.

Dujų balionėlis su propilenu (26%) + butanu + propanu. Tinka naudoti visais metų sezonais iki - 13°C.

Lituoklis su automatiniu liepsnos uždegimu (piezo) ir gryno vario antgaliu ( kodu 678 arba 679 pasirenkant 367/9 lituoklį).

Guilbert Express butano dujomis varomas lituoklis su sukama rankena, puikiai tinka profesionaliems stogo dengimo darbams

Paprastas ir efektyvus įrankis profesionalams

šis stogdengio lituoklis yra garantuotos aukštos kokybės įrankis, kuris padės profesionaliems stogdengiams kasdieniniame darbe reikalaujančiame pačių techniškiausių rezultatų.

Komplekte yra:

• degiklis su antgaliu 35 x 3.5 mm dydžio ( kodu 4678 ) arba 45 x 5 mm ( kodu 4679 )
• viena rankena ( kodu 600 )
• viena žarna 4,75 m ilgio ( kodu 963/5 )
• vienas reguliatorius 2 bar ( kodu 682 )

Tinka dirbti su cinku, variu, nerūdijančiu plienu, cinku su patina, švinu.

This roofer soldering iron Cat. No. 63778 or 63779 is silent and equipped with a burner for use with zinc, copper, stainless steel and lead. The connector on the handle Cat. No. 603CR 3/8" left-hand thread has:
• an elbow union to prevent the hose from breaking;
• a quick-connection system;
• a swivel design to make it easy to work in any position.
This soldering iron, which produce very little noise, reach its target temperature twice as fast as a conventional model.
Its design produce significant energy savings and a long useful life.
Its two-position base with a spring system makes it easy to switch to standby mode.

Guminė žarna NF EN ISO 3821 su antgaliais (3/8).

Guminė žarna NF EN ISO 3821 su antgaliais (3/8).

Turbo tip, ref. 1772, for roofer soldering irons is specially treated for long life.

The Turbo tip is suitable for very severe conditions (altitude, strong wind, cold) : the flame penetrates into the core of the tip, so that working temperature is reached more quickly.
Express Turbo tips are given a new type of long life treatment, so that they last around 5 times longer than conventional tips.
Their utilisation rules must be strictly observed:
Do not strike
Do not file
Do not overheat
Do not immerse suddenly in cold water....
....these actions would destroy the tips' unique surface treatment, and you would lose their advantages and efficiency!
Light cleaning with ammoniacal stone, Cat. No. 9641 or Cat. No. 9642 is sufficient.

Spare solid Turbo tip in 99.9% pure copper for roofer solidering iron packs and "tip + burner" sets.
The Turbo tip is suitable for severe conditions (altitude, strong wind, cold) : the flame penetrates into the core of the tip, so that working temperature is reached more quickly.

Atsarginiai antgaliai, pagaminti iš 99,9% gryno vario, skirti stogo litavimo darbams.

Atsarginiai antgaliai, pagaminti iš 99,9% gryno vario, skirti stogo litavimo darbams.

Burner for roofer soldering irons, with compact, light and quiet tip, Cercoflam wrap-around flame.
Heats up very quickly. Considerable energy saving.
Body in hardened cast iron with anti-corrosion treatment.
2-position stand with spring effect.
Roofer soldering iron burner suitable for working with zinc, copper, stainless steel, zinc with patina and lead.

šis degiklis yra kompaktiškas, lengvas ir tylus.

Handle 603CR with bent nipple and quick-release coupling.
This new elbow handel allows to avoid broken hoses.
This ergonomic handle 603CR mades by Guilbert Express promotes a rapid assembly with hose and prevents the hose winding.

Handle with thumb-operated-valve and swivel attachment, 3/8” left in, dual tightness from connection to burners: nitril seal and metal on metal cone M18 X 1 male burner connection thread.

Handle with thumb-operated-valve and swivel attachment, 3/8” left in, dual tightness from connection to burners: nitril seal and metal on metal cone M18 X 1 male burner connection thread.

The set comprises of a handle Cat. No. 600, a 4.75 meter rubber hose Cat. No. 963/5 and a 2 bar HP regulator Cat. No. 682.

The set comprises of a handle with thumb-operated valve and swivel attachment Cat. No. 602 , a 4.75 meter hose Cat. No. 963/5, a 2 bar HP regulator Cat. No. 682.

The tools contained in the complete maintenance kit Cat. No. 99600 form the basics required for roofing work and come in an attractive black bag.
The kit includes a hammer, a file, a brass-plated steel wire brush and grease remover Cat. No. 99603 for the metal parts in roofer soldering irons and their gas nozzles.
It will be a useful aid for all your roofing work.

A multitask hot air gun!
Guilbert Express hot air gun 4500, sometimes called heat gun, offers many action possibilities. It heats zinc without breaking, shapes ducts and PVC pipes, heats heat-shrinkable sleeves, unglues plastic tiles and adhesives, makes it easy to install flexible floors.
But this hot air gun can also weld and repair PVC tarpaulins, dry drywall joint tapes, strip and dry paints and varnishes, defrost pipes and locks, loosen nuts and bolts.
This heat gun has a Piezo ignition, its return is immediate, and can work up to 17.6°F.
It comes with 2 nozzles, flat and reflector, Cat. No. 11965 and 11255 specially and exclusively designed for the Guilbert Express hot air gun Cat. No. 4500.
Works with cartridge Cat. No 444.

Salmiak stone 140 g for holders Cat. No. 9640 and Cat. No. 9645

For sheet metal roofingand zinc-works.
The Salmiak stone is used to strip and clean soldering irons tips.
The product proposed by Express,allows a perfect stripping , which involves a higher quality of work.
Very easy to use. Holder Ref. 9640 allows to have essential tools for successful work.

For sheet metal roofingand zinc-works.
The ammoniacale stone of 140g is used to strip and clean soldering irons tips.
The product proposed by Express allows a perfect stripping , which involves a higher quality of work.

Very easy to use, this new compact holder Cat. No. 9640 allows to have essential tools for successful work.
For sheet metal roofingand zinc-works.
The ammoniacale stone is used to strip and clean soldering irons tips. This one is higher than the holder so easy to use
The new product proposed by Express, allows a perfect stripping, which involves a higher quality of work.`
You have the possibility to place the brush to the right or the left of the holder (depending on right or left handed)
Last but not least, this product has a good stability with its 4 feet.

This holder comes with a salmiak stone Cat. No. 9641 to clean roofer soldering iron tips made of copper, a space to hold a spare salmiak stone on the back, a container for the chosen flux and a specially designed holder for the flux pot cap, as well as a brush for the technician to apply flux to the metal parts to be assembled.
A space has also been provided for holding tinning paste Cat. No. 852 and you will find plenty of tips in the technical data sheet that can be downloaded from the Documentation tab below.

This paste allows tripping and tinning of the iron tip in the same time .
With a well cleaned and pre-tinned tip, the roofer can  obtain very clean weld beads.
Last but not least, this paste doesn' emit toxic gases.

Naudojami kartu su Express rūgštimis efektyviam ir optimaliam darbui.

Specialiai pagaminti naudoti kartu su Express rūgštimis.

Super Decap' Express for roofing, recommended for  oxidized metals 320 ml.
For tin solder.

Super Decap' Express for roofing, recommended for  oxidized metals 320 ml.
For tin solder.

Super flux recommended for natural zinc.
Also for stripping copper, brass and galvanized steel.
Doesn't run.

Super flux recommended for pre-weathered zinc.
It is very efficient on oxidized zinc.

Part of the Express range of roofing flux, this complete mineral flux Cat. No. 851 offers a very high level of wettability¹.
It is the ideal product for all roofing preparation work performed in workshops and on roofs (gutters, slopes or ridges). The working temperature for this product ranges from 228°C to 720°C.
As with all Express products, you will find this flux Cat. No. 851 at your regular dealer.
-------
¹Wettability is the ability of the filler metal to spread over the surface being processed.

Particularly suited to working with aluminium, this Express flux comes in the form of gel in a pot.
This roofing flux is highly resistant to corrosion and can be used at temperatures ranging between 398 and 420°C.
Particularly suited to working with the Express range of roofer soldering irons, this flux is part of a comprehensive range of flux regularly recommended for roofers.
As with all Express products, you will find this product at your regular dealer.

Presented at the Batimat 2013 trade show, Decap' Green Flux Cat. No. 855 is a complete organic flux for roofing work.
It produces no toxic fumes.
It can be used for all types of applications: zinc (new and oxidised), copper and tin-coated steel.
Decap' Green Flux Cat. No. 855 contains no zinc chloride and is therefore harmless to plants and animals.
This all-new product avoids any zinc corrosion.
It is supplied in a 320 ml bottle with a brush.

Specially designed for use on tinned stainless steel, this new Guilbert Express roofer's flux comes in a 500 ml plastic bottle.
Its built-in spray nozzle gives perfect control over the amount of product you use, thereby preventing wastage.
Presented exclusively at the Batimat trade show, Décap'inox Cat. No. 853 is part of Guilbert Express' new ranges of mineral and organic flux that provide environmentally-friendly solutions for the numerous materials on which roofers are increasingly required to work.

Alavo 33%

Alavo 33%

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Guilbert Express offer a complete range of aerosol paints to give all weld beads exactly the same colour as the zinc sheets used for roofing work.
They also protect the zinc against corrosion. They are extremely easy to use. Once the bead to be covered has been degreased, simply apply the aerosol paint in the normal way, at a distance of about 15 cm.
Our aim was to identify the colours favoured by architects. These colours are now available for you to use.

Supply rubber hose NF EN ISO 3821, per 20 m. For torches using gaseous phase butane or propane with ear clamp for safe connection and durable concentric tightening.

Guminė žarna, 20 metrų, NF EN ISO 3821.

Lanksti guminė žarna skirta butano ir propano dujų degikliams.

HP regulator with manometer and security, 3/8" left.